There is a complete list of navigation links at the bottom of each page on our site.

PLEASE NOTE:

To choose the proper size cupola for a one story building you should have at least one inch or more of cupola width for each foot of unbroken horizontal roof line. If your building is higher than one story we recommend choosing a larger cupola. Please keep in mind a window cupola will look smaller than the same size louvered cupola.

Click on a picture for a better view

MODEL

CUPOLA SIZE

CYPRESS WITH 11" BASE

CYPRESS WITH SHIPLAP BASE

STANDARD
HIP ROOF
shown- 20"
Cypress with
Shiplap Base

18 x 18 x 29
20 x 20 x 36
22 x 22 x 39
24 x 24 x 40
26 x 26 x 40
28 x 28 x 41
30 x 30 x 41
28 x 36 x 42
36 x 36 x 62
42 x 42 x 63
48 x 48 x 65

    $330**
$360
$445
$525
$605
$710
$790
$875
$1000
$1165
$1325

$355 2 lap
$410 3 lap
$495 3 lap
$575 3 lap
$655 3 lap
$760 3 lap
$840 3 lap
$925 3 lap
$1075 4 lap
$1240 4 lap
$1435 4 lap

DELUXE
CURVED ROOF
Shown- Pine w/
Shiplap Base

20 x 20 x 40
22 x 22 x 42
24 x 24 x 43
26 x 26 x 44
28 x 28 x 44
30 x 30 x 45
28 x 36 x 46
36 x 36 x 67
42 x 42 x 68
48 x 48 x 70

$410
$495
$575
$655
$760
$840
$925
$1075
$1240
$1435

$460 3 lap
$545 3 lap
$625 3 lap
$705 3 lap
$810 3 lap
$890 3 lap
$975 3 lap
$1150 4 lap
$1315 4 lap
$1510 4 lap

MODEL

CUPOLA SIZE

CYPRESS WITH 11" BASE

CYPRESS W/ SHIPLAP BASE

STANDARD
WINDOW

CENTER MULLION

48 x 48 x 65

$1465

$1575 4 lap

DELUXE
WINDOW

CENTER MULLION

48 x 48 x 70

$1575

$1650 4 lap

COMBINATION
WINDOW / LOUVER
CUPOLA
Shown:
42" Cypress with
Standard Hip Roof
and Shiplap Base

(Windows not available
on 16" models.)

All Window models on this page, Standard or Deluxe Roof, 11" or Shiplap base, are constructed with aluminum window grids with a paintable white enamel finish. The pane of 1/8" glass behind each grid is removable for easy painting. If you prefer not to have windows on all sides we can substitute louvers. Please use the following chart for pricing.

For each side that louvers are substituted for windows please subtract:

MODEL

CUPOLA SIZE

CYPRESS WITH 11" BASE

CYPRESS W/ SHIPLAP BASE

STANDARD WINDOW HEXAGON
Shown
35" Pine
Standard Roof
11" Base

30 x 30 x 40
35 x 35 x 41
40 x 40 x      
48 x 48 x      

  $875
  $890
$1475
$1665

  $890 3 lap
  $965 3 lap
$1575 4 lap
$1765 4 lap

DELUXE WINDOW HEXAGON
Shown
30" Red Cedar
Deluxe Roof
11" Base

30 x 30 x 40
35 x 35 x 41
40 x 40 x      
48 x 48 x      

  $890
  $965
$1575
$1765

  $965 3 lap
$1040 3 lap
$1675 4 lap
$1865 4 lap

MODEL

CUPOLA SIZE

CYPRESS WITH 11" BASE

CYPRESS W/ SHIPLAP BASE

STANDARD
HIP ROOF
CYPRESS

WINDOW OCTAGON

24 x 24 x 35

30 x 30 x 43

    $800**

$885

$875 2 lap

$960 3 lap

DELUXE
CURVED ROOF
CYPRESS

WINDOW OCTAGON

24 x 24 x 37

30 x 30 x 46

    $875**

$960

  $950 2 lap

$1035 3 lap

ARCHED TRIM CUPOLA MODELS
Shown- Standard Roof, Arch Trim with 11" Base in Pine

Arch Trim Available on all Cupolas

For Arched Trim:

To Pine add:

$20 for 16" through 24"
$30 for 26" through 30"
$30 for 30" and 35" hexagons
$35 for 28"X 36" through 42"
$40 for all other models

To Cypress,
White Cedar,
Mahogany,
or Red Cedar,                     add:

$30 for 16" through 24"
$40 for 26" through 30"
$40 for 30" and 35" hexagons
$45 for 28"X 36" through 42"
$50 for all other models

For additional laps on Shiplap bases:  (per lap)

To Pine add:

$10 for 16-inch or 18-inch
$20 for 20-inch to 30-inch square models
$30 for all other models

To Cypress,
White Cedar,
Mahogany,
or Red Cedar,                     add:

$20 for 16-inch or 18-inch
$30 for 20-inch to 30-inch square models
$40 for all other models

WOODSHOP GUARANTEE

We guarantee our handcrafted cupolas and Phil Alley's handcrafted weathervanes to be free of defects from faulty materials or workmanship for 5 years from date of purchase, when installed and maintained as per instructions, or we will repair or replace it free of charge.

Cupola size: Measurement at the bottom of the shiplap base (the 3rd number is the height). Also approximate measurement across the bottom of the cupola roof. Example: 24 x 24 x 43 means approximately 24" x 24" at the bottom of the shiplap base (and the bottom edge of the cupola roof), and approximately 43" high from the bottom of the shiplap base to the top of the cupola roof. Cupolas with the 11" base are shorter and the bottom of the base is slightly narrower.
See the chart on our Choosing Your Cupola Size page for more information.

Prices subject to change without notice.

Our aluminum window grids have either 2-lites, 4-lites or 6-lites, depending on cupola size.
18" through 26" square cupolas have 4-lite grids.
28" through 48" square cupolas have 6-lite grids.
28" X 36" rectangular cupolas have 6-lite grids.
48" Center Mullion cupolas have 4-lite grids.
24" Octagon cupolas have 2-lite grids.
30" Octagonal cupolas have 4-lite grids.
30" Hexagon cupolas, 35" Hexagon cupolas and 48" Hexagon cupolas have 4-lite grids.
40" Hexagonal cupolas have 6-lite grids.

Our Cupolas are designed to accept a weather-vane and are shipped with easy mounting instructions for the do-it-yourselfer.  You may order your cupola with a solid roof cap at no additional charge if no vane will be added.

All cupola models are available with Standard Hip Roof.
All cupola models except 16" and 18" are also available with Deluxe Curved Roof.

All cupola roofs are covered with 16 oz. copper.

All cupolas are built using Clear Select grade lumber.

All of our Pine, Cypress or Red Cedar Cupolas are available with either base style; 11" base (plain) or SHIPLAP base (layers).

All of our White Cedar or Mahogany Cupolas are available with the SHIPLAP base only.